First Layer Issues - Creality K1 Max - 3D Printing Space

I’ve been all over the place with this machine so far, and this is where I am now. Any suggestions as to what direction I should be heading are appreciated. Rooted K1 Max/Orcaslicer/Duramic PLA/0.4mm nozzle @230⁰/speed: 50mm/retraction: 0.5mm @ 60mm second My starting flow ratio is 0.99 and my line width was at 0.34mm. I am playing with my Z offset and flow rate on the Fluidd interface as I go with these. The filament is dry. The flow settings shown on the pic are relative to the starting po

Creality K1 Max - 3DJake International

3D Printing First Layer Problems: How to Make It Perfect

K1 Max 3D Printer, 3Ding

K1 Max reaches 600mm/s* in only 0.03s based on 20000mm/s² acceleration. It can be as productive as several 3D printers together. K1 Max: 600mm/s

K1 Max AI Fast 3D Printer

The Best Creality K1 Mods & Upgrades of 2023

First Layer Issues - Creality K1 Max - 3D Printing Space

Creality K1 Max 3D Printer With AI Camera LiDAR Dual Hands-free Auto Leveling Dual-gear Direct Extruder 600MM/S Printing Speed - AliExpress

K1 first layer help : r/crealityk1

First layer issue with K1 Max : r/crealityk1

Comprehensive Troubleshooting Guide for K1 Max 3D Printing Issues