Janome Rolled Hem D2 Foot (4mm), 9mm - Red Deer Sewing Centre
The Janome 4mm Hemmer Foot for 9mm Machines is used for making rolled edges on light to medium weight fabrics. The channel guide holds the rolled fabric and allows for a straighter hem. The hemming (hemming) foot will allow us to provide a nice, aesthetic finish to dresses, skirts, blouses, shirts, bedding, tablecloths, table runners and curtains. It is designed for sewing light and medium thickness fabrics. Before hemming, fold the edge of the fabric twice to a width of 4 mm and it is good to press it to a length of approx. 3 cm. Then, when sewing, it is enough to guide the fabric evenly, because the guide on the foot will make a perfectly even fold of the fabric itself. The width of the hem after stitching is 4 mm.
Janome Fashion & Finishing Accessory Kit for 9mm Models - Red Deer
Janome Hemmer Feet Set (4mm & 6mm) - Red Deer Sewing Centre
Janome Hemmer Feet Set (4mm & 6mm) - Red Deer Sewing Centre
Janome Rolled Hem Foot (6mm) for 9mm Max Stitch Width
Rolled Hem Foot (4mm) D2 - Missouri Sewing Machine Company
Janome Hemmer Feet Set (4mm & 6mm) - Red Deer Sewing Centre
D2 Belt Crafting Cheapest Factory
Hemmer Foot 4mm D2 for Janome 9mm machines
Sewing Machines, Sergers & Accessories - Page 6
The Rolled Hem Foot is used to stitch the narrow rolled hems usually found on shirt tails, table linens, and along the edges of frills. The Rolled Hem
Rolled Hem Foot (4mm) D2